Questions for a Union property
Use the building and project details below to prepare for a conversation. Confirm current service availability and the appropriate assessment with the receiving provider.
Roof repair, replacement and inspections
Looking for a repair, a replacement quote or an inspection in Union? Choose the work you need to discuss. The receiving provider confirms service for your address, scheduling and any visit charge.
- Roof repair
- A leak, damaged covering or a recurring stain. Ask which roof detail has failed and what the proposed repair will change.
- Roof replacement
- Planning a larger project? Compare removal, the new assembly, flashing and how concealed damage would be documented and priced.
- Roof inspection
- Not sure what the roof needs? Ask what will be inspected, how findings are recorded and whether there is a charge for the visit.
Describe the roof actually present at the property: covering, slope, deck if known, additions and earlier reroofs. Buildings in the same community can have different assemblies and repair histories. Use the assessment and available records to establish the work rather than infer the roof design or condition from the neighborhood.
Colonials, capes, splits and the older center
Identify the actual building configuration before comparing roofing work. Detached houses, attached homes, mixed-use buildings and buildings with several units can have different approval and access requirements. Record the covering, roof levels, additions and shared connections at this address.
For a slate roof, assess the pieces, fasteners, flashing and support separately. Suitable local repairs may preserve serviceable material, while broader deterioration can require a larger scope. Match replacement pieces and attachment methods to the retained roof rather than deciding from age or appearance alone. asphalt shingle
Confirm whether the building is detached or shares a wall and state the number of dwelling units. That information helps the construction office evaluate the roof-covering scope under New Jersey's rules; the label two-family does not establish that a building is detached.
Identify the affected flashing or roof component
A valley collects water from adjoining roof planes. Its lining or shingle detail must suit the selected covering and connect correctly to the surrounding roof. Ask the assessment to identify any damaged valley components and explain what the repair or replacement scope renews.
At a sidewall or chimney, distinguish the step flashing interwoven with shingles from the counterflashing that protects its upper edge. Ask the contractor to assess both, along with the chimney width and upslope water diversion, before specifying repairs.
If ice dams or attic moisture are part of the concern, assess air leakage, insulation and the roof or attic design together. A vented attic needs its intended air paths maintained; an unvented assembly uses a different approach. Coordinate any needed changes with the roofing scope rather than assuming new gutters or a ridge vent alone resolves the cause.
The permit rule
New Jersey classifies repair or replacement of an existing roof covering on a detached one- or two-family dwelling as ordinary maintenance under N.J.A.C. 5:23-2.7. That category does not require a construction permit or inspection. Identify the building type and separate the covering work from any other proposed work before applying that rule.
Contact the Union Township Building Department with the property address, building use and written roof scope. Identify retained layers, structural work, new openings and rooftop equipment separately. Use the office's current application guidance to confirm submission and inspection requirements for the project.
Separate roof-covering work from structural changes, a new opening, an altered roof shape or rooftop equipment. Describe the full proposal to the municipal construction office so it can identify the applicable permits and technical sections. Use the current department guidance for submission and inspection arrangements.
Zoning is a separate question. The township publishes a zoning permit list that covers new homes, additions, decks, pools, fences, sheds and driveway expansions, but not roof covering replacement. A dormer or a second-story addition does change the bulk of the house and does raise a zoning question. Start that review before the construction application is filed, because a zoning issue discovered after the design is final is expensive to fix.
Slate, and the older roofs worth keeping
On a natural slate roof, assess the slate pieces, fasteners, flashing and supporting structure separately. The National Park Service recommends retaining and repairing serviceable historic slate where feasible. The decision depends on the type and extent of deterioration, not age alone.
Ask a slate-repair proposal to identify the pieces, fasteners and flashings affected, the matching material available and the access method. Compare that defined scope with broader replacement using the documented condition of the retained roof.
Weather and the tree canopy
Tell the assessor whether water appeared during wind-driven rain, after snow or ice, or following a particular storm. Include safely obtained photographs and the location of earlier repairs. Inspect the covering, edges, penetrations and drainage together so the scope follows the actual findings rather than an assumed local failure pattern.
Note whether the symptom occurs only during thawing, during wind-driven rain or after every rainfall. Record the affected room and any earlier repair. The assessor can use that history with roof and wall observations to narrow the water path.
The two-family streets near the center
If adjoining buildings share a roofline or wall, identify the ownership and access arrangements before defining work at the boundary. Ask how retained neighboring details will be protected and whether permission is needed for any proposed access.
Where roofs meet at a shared wall, identify the boundary of the proposed work, the adjoining roof condition and any access permissions. The termination must suit both assemblies. Keep responsibility for the weatherproofing detail distinct from responsibility for the wall and any required fire separation.
Where an addition, lower roof or rooftop enclosure meets a wall, ask the assessment to examine that junction separately from the main roof field. The covering, flashing, wall condition and drainage route can lead to different repairs. Identify the failed component before agreeing to a surface patch.
On these streets, the work also has to account for access. The lots are narrow, the driveways are shared or absent, and a container may have to sit on the street. Confirm the staging plan before delivery day, and protect the neighbor's property as carefully as the owner's.
Repair or replace
A localized flashing, ridge or valley defect may be suitable for repair when the surrounding covering and support remain serviceable. The assessment should explain the repair boundary, how new material joins the existing roof and which findings would justify a larger scope.
Widespread deterioration, repeated leakage or uneven roof surfaces warrant a closer assessment of the covering and its support. Compare a defined repair with removal or replacement using the actual extent of damage, existing layers and retained-material condition. Repeated patches or roof age alone do not settle that choice.
Access and staging
Check whether the property has usable driveway space and identify any trees or overhead obstructions affecting access. The delivery and protection plan should fit the actual address.
Where the house sits on a busy road or has no driveway, the container may need to go on the street, and the township's requirements apply. Confirm before delivery day. The crew should protect the landscaping and run a magnetic sweep at the end, because a wide lawn hides nails better than a driveway does.
What to have ready when you call
The address, the roof type if you know it, and whether the roof is shingle, slate or a flat addition. Say whether the house is detached or attached, and how many units it contains. Describe where the water shows up and when. If the house has ice dams every winter, say so. If a prior repair was done, say where and when.
That is enough to arrange a look and a scope. On a detached Union Township house, the permit question is usually answered by the building type, and the detailing question is answered on the roof.